The Pip Berry Tree

The Pip Berry Tree


Sunday, March 27, 2011

Good Morning Sunshine : Curated by LilyMarieCandleCo on Artfire

We could all use a little sunshine, and this wonderfully bright and sunny collection put together by LilyMarieCandleCo on Artfire  gives us just that. Take a peek.

Usually I do my shameful self plug last, but since my slate apparently set the theme for the collection I am doing it first. :)

Thursday, March 24, 2011

Ewes Gotta See This Etsy Treasury

Just satisfying my sheep fetish here. LOL. Here is some of  the work displayed in my Ewes Gotta See This treasury on Etsy. Hope you like :)

Baby Black Sheep by

Hooked Rug Sheep Hand Hooked and Proddy Rug by

Sheep Cereal Bowl by

Primitive Easter Ornie by

Wristlet pouch - DANCING LUCKY SHEEPS by

and last but not least my shameless plug.....

Ewes Not Fat. Ewes Fluffly Hand Painted Decorative Slate by

Wednesday, March 9, 2011

Signs With A Sense Of Humor

With so much doom and gloom splashed all across the front pages of the news papers they should be renamed, "The Blues Papers"   I realize it's good to be informed, but it's also good to laugh.
In fact, laughing can have a profound positive impact on your health. Did you know there's even "Laughing Yoga" now.  I didn't. But I do know there's lots of  humorous signs on Etsy that are sure to make a smile form on many a face and even produce a chuckle or two.
Today I created a treasury on Etsy called "Signs With A Sense Of Humor. Here's the link and a few highlights Please feel free to share.

Thursday, March 3, 2011

Four Fantastic Lawn and Garden Ornaments on Etsy

For some spring has arrived and for others it's right around the corner. That means it's time to put on our boots and work gloves and get out there to spruce up the lawn and garden. It's time to rake up any leftover leaves from the fall, turn the soil in the garden, plant some bulbs if we didn't get to it before the first frost, and dust off the lawn and garden ornies that have been in the garage all winter just waiting for their day in the sun again.

I have my old favorites that get planted in the ground, hung on a tree, or suspended from a wrought iron hook, but other ornies don't seem to last that long. With that said, I decided to comb the Etsy web site in order to find four fantastic must have lawn and garden ornies. Now, you might be wondering, "Why four? That's an odd number." True, but one is a shameful plug of my on fantastic lawn and garden ornie, so that's the fourth. lol! Anyway, I hope you like my collection.

The first item is crafted by Mulberry Lane Folk Art is a western rustic coat rack that is made on an old weathered board, and would look great over a gardeners potting bench.

The second item is a Folk Art Primitive Saltbox House VinTage Rope Hanger Barn Red Seed Feeder Bird Feeder crafted by Harmons Country Crafts.
The third must have lawn and garden decoration is this absolutely splendidly prim Upcycled Redwood Cottage style garden bench crafted by Mill Creek Cottages.
And last but certainly not least is my own lawn and garden ornie. This is my  Personalized, Hand Painted  Lawn and Garden Saltbox House Slate complete with wrought iron slate holder.
Well that's all for today folks! If you want more information on how to order any of these great items please visit their Etsy store, and be sure to tell them that I sent you.

Warm Wishes!

Wednesday, March 2, 2011

Primitive and Folk Artists - PAFA: Primitive and Folk Artist Spring Giveaway 21 Prize...

Primitive and Folk Artists - PAFA: Primitive and Folk Artist Spring Giveaway 21 Prize...: " Welcome to the First Group Giveaway by the Primitive and Folk Artists Etsy Team. Rules for entering are at the bottom of this post. Pl..."

I've Been a Busy Bee Today

Slates. Slates. Slates, and more slates. Here are four new slates I just put in the store. Tell Me what you think.
Spring is right around the corner, so lets get hopping! *

It's finished! This is the "God Bless America" Slate from the tutorial I posted.

Don't they look happy? This is my "Happy Flowers" slate...just in time for spring.

Hee! Hee! If you work or have worked in an office then you know a sense of humor is a MUST.

Tuesday, March 1, 2011

How to Make A Decorative Slate Tutorial (hanging or 7x9" lawn and garden ) .

I've been asked many times how do I make my  decorative slates. Well, the last couple of days I decided to take time out of my schedule and put together a picture tutorial for anyone here who is interested in having a go at making your very own decorative slate. Please feel free to share my link, but no copying and pasting please. I purposely posted my info.on all my pictures to help avoid people who may be tempted to do so.  :)

Things you will need: roofing slate, slate cutter (can be purchased at a roofing supply house), t square, marker, drill, 5/32" drill bit, ruler, leather cord (for hanging slate), acrylic paint, clear acrylic spray paint (sealer), paint brushes, pencil, safety goggles, face mask. The mask is important because slate dust is bad for your lungs.
1) Obtain a roofing slate.  Where you say? My husband is a roofing contractor, so I get it from him, but you can purchase it at a local roofing supply house, or check listings for used slate from old houses, barns, etc., or you can go to a chain craft store if you are only looking to make one. Anymore then one can be costly at a craft store. But Alas! I also sell them on my Etsy and Artfire store at a fraction of the cost, and I will drill the holes for you if you want a hanging slate. If you don't see the size you want in my store window fear not, I have lots, just convo. me, and I will make a custom order for you. FYI. All full size roofing slates have the two holes in them. You can either cut around them or fill them in with epoxy and paint over them.
roofing slate
2) Decide what size you want your slate to be and if you want it to hand vertical or horizontal. Once you know, turn the slate over to the back side and begin to measure it out to your desired size with your t square and marker. Couple of things here. You MUST do this on the back side of the slate (that's the flattest side) since this is the side you will be cutting from, and also (never cut from the front), when using a t square you need to make sure the edges of the slate are straight to line the t square up properly or the whole thing will be off. Usually this is not an issue unless the slate has been used already.

3) After you have measured your slate to the desired size place the slate (back of slate facing up toward you) on the slate cutter, and line the edge of the blade up with you line to be cut.  This is very tricky and please make sure you watch your figures, so that they don't get caught under the cutter blade.
 Hold the slate firmly in place with one hand and with the other begin to depress the cutter bar in a slow but steady fashion. Continue cutting until slate is the desired size. NOTE: If slate is hard to cut, or if it keeps breaking, your blade may need to be sharpened. (Safety goggles and mask should be worn).
cutting slate with a manual slate cutter

4) If your slate is going to be a hanging slate now is when you want to drill the holes. Take your t square and measure out the holes. Mark with a marker.
mark slate where you want to drill holes
5) Begin to drill the holes. Hang slate over the edge of a table or counter, and then hold slate with one hand while drilling with the other. This picture is not the best example. It was just me, and I needed to take the picture too. Not enough hands. :)
drill holes in slate with a 5/32" drill bit
6) At this point the slate is pretty dusty, so you will want to wipe it down with a damp cloth.

7) The next step is to put a base coat on the slate. It can be a background color that you will be using or any old color you are going to paint over. If you don't want to use a base coat that's ok, but just know that it will be harder to paint straight lines because of the natural surface of the slate.
apply base coat to slate

8) Draw your design on the slate with a pencil making sure to use your t square and ruler to mark out any border you may have, words, or any other object that may need to be straight or centered.

measure out any borders or anything else that may need to be straight or centered

9) Your colors should have been chosen, because now it's time to paint! Keep a few things in mind before you begin: A) Make sure that your idea is a well thought out idea, and that you have the skill to paint it. However, if your not the next Picasso no worries, do something that is simpler and within your means, or use a stencil. Slates are the perfect format to stencil on. ;)  B) Use a good paint brushes to ensure clean edges. C) Use a better quality acrylic paint. You want to avoid paints that are clumpy or are too thin, because they don't cover that well and are hard to control. Paint brushes and paint can be purchased at your local craft store or on line.
I started with a checker border here, but it just looked too busy, so I changed it to black

You can leave it the way it is or add words in the grass area. EX. God Bless America or  personalize it "The Mimnaughs".
10) Once you are finished painting and you are satisfied with your work of art make sure any remaining pencil marks are erased.

11) Take the slate to a well ventilated area (preferably outside) lay it on a protected surface and get your mask back on. This is the part where you are going to seal it with a clear acrylic spray paint for protection, especially if it is going to be outside. I put several coats on just to be extra sure. NOTE: There are three types of finish with clear acrylic spray paint. Glossy, Satin, and Matte. I like glossy because it really makes all the colors pop.
Spray slate with clear acrylic spray paint for protection. (Yes I know my America is not centered. Whoopsie ;) it's not staying.
12) Wait for it to dry. If this is a lawn and garden slate, at this point you are ready to put it in your wrought iron slate holder (I sell them too:)

13) If this is a hanging slate then now is when you want to thread it with the leather cord. Measure you leather cord out to be cut. For a slate this size,  you would want to measure the cord about 15 inches. Once you have done that thread one end of the cord through the back of the slate and tie in a Knot in the front.
thread through a hole from the back
tie a simple knot
14) Repeat on the other side and then your slate is ready to hang.
hanging slate
And VIOLA! Stand back and admire your hard work. I hope you like my Decorative Slate tutorial. These make wonder gifts for friends and family. Plus, the possibilities of what you can paint are endless ( just check out my store :)
If you have any questions I can help you with please feel free to comment or e mail me at
And remember SAFETY FIRST!